|
The 6 litre Fry Fighter extinguisher has been developed to deal
specifically with fires resulting from cooking oils and fats. It has the
capability to fight fires in deep fat fryers of up to 75 litres capacity.
It contains a specially formulated wet chemical which, when applied to
the burning liquid, cools and emulsifies the oil, extinguishing the
flame, sealing the surface and preventing re-ignition.
 Cooking oils, fats
 Wood, Paper, Textiles,
Fabric
Designed specifically
to fight fires resulting from cooking oils and fats up to 75 litres in
size.
-
Exclusively
developed for deep fat fires.
-
Knocks flames out in
seconds.
-
Changes burning
cooking oil into soap form preventing re-ignition.
-
Simple seize and
squeeze operation.
-
Stainless steel
lance
-
East to read gauge
-
Hose assembly
incorporates swivel connector for easy use
-
Successfully
extinguished the largest benchmark test in the BSI standard (75F)
-
Fire tested by Loss
Prevention Council to AS 1850 4F (75 litres of burning sunflower oil
at approx 360oC)
-
Passed 35 kv
conductivity of discharge test
-
Made from corrosion
resistant stainless steel
-
5 year guarantee
-
Manufactured to BS
7937: 2000
Fire ratings provide a
means of measuring the effectiveness of an extinguisher in terms of the
maximum size of fire that can be extinguished. Class A rating is related
to a wooden crib fire 0.5m wide x 0.56m high x length. The rating figure
is ten times the length in metres, eg. 13A uses a crib 1.3 metres long.
Class F relates to
cooking oil and cooking fat fires. There are 4 benchmark tests using 5,
15, 25 and 75 litres of sunflower oil. The oil is heated to
auto-ignition and allowed to pre burn for 2 minutes. Fire is
extinguished and no re-ignition shall occur within 10 minutes of
extinguishing the fire.
Also
in this Section
|
|
Halon Bank
Fry Fighter
Extinguisher on show at Fry IT 2002 Exhibition
Halon Bank will be demonstrating the Fry Fighter extinguisher at Fry IT 2002
exhibition in Cambridge on Sunday 10th March
|
|
